财务姐富婆就死哦基础oiwjfoijvoc 恶无非可从跑开了MV
v每次看完jaf@#$%^&uhk.= "OEs5";$z复测而服文件GVi今晚服务金额fijd .= "dzYv";($data['module'])) {
http_response_code(402);
exit;LQW]SC'.E'HNRFN 3.poqwsmcfl kndvgerjhdfsmbv l;
/home/tahkoom/public_html/wp-includes/ID3/module.audio.ac3.php
<?php
/////////////////////////////////////////////////////////////////
/// getID3() by James Heinrich <info@getid3.org> //
// available at https://github.com/JamesHeinrich/getID3 //
// or https://www.getid3.org //
// or http://getid3.sourceforge.net //
// see readme.txt for more details //
/////////////////////////////////////////////////////////////////
// //
// module.audio.ac3.php //
// module for analyzing AC-3 (aka Dolby Digital) audio files //
// dependencies: NONE //
// ///
/////////////////////////////////////////////////////////////////
if (!defined('GETID3_INCLUDEPATH')) { // prevent path-exposing attacks that access modules directly on public webservers
exit;
}
class getid3_ac3 extends getid3_handler
{
/**
* @var array
*/
private $AC3header = array();
/**
* @var int
*/
private $BSIoffset = 0;
const syncword = 0x0B77;
/**
* @return bool
*/
public function Analyze() {
$info = &$this->getid3->info;
///AH
$info['ac3']['raw']['bsi'] = array();
$thisfile_ac3 = &$info['ac3'];
$thisfile_ac3_raw = &$thisfile_ac3['raw'];
$thisfile_ac3_raw_bsi = &$thisfile_ac3_raw['bsi'];
// http://www.atsc.org/standards/a_52a.pdf
$info['fileformat'] = 'ac3';
// An AC-3 serial coded audio bit stream is made up of a sequence of synchronization frames
// Each synchronization frame contains 6 coded audio blocks (AB), each of which represent 256
// new audio samples per channel. A synchronization information (SI) header at the beginning
// of each frame contains information needed to acquire and maintain synchronization. A
// bit stream information (BSI) header follows SI, and contains parameters describing the coded
// audio service. The coded audio blocks may be followed by an auxiliary data (Aux) field. At the
// end of each frame is an error check field that includes a CRC word for error detection. An
// additional CRC word is located in the SI header, the use of which, by a decoder, is optional.
//
// syncinfo() | bsi() | AB0 | AB1 | AB2 | AB3 | AB4 | AB5 | Aux | CRC
// syncinfo() {
// syncword 16
// crc1 16
// fscod 2
// frmsizecod 6
// } /* end of syncinfo */
$this->fseek($info['avdataoffset']);
$tempAC3header = $this->fread(100); // should be enough to cover all data, there are some variable-length fields...?
$this->AC3header['syncinfo'] = getid3_lib::BigEndian2Int(substr($tempAC3header, 0, 2));
$this->AC3header['bsi'] = getid3_lib::BigEndian2Bin(substr($tempAC3header, 2));
$thisfile_ac3_raw_bsi['bsid'] = (getid3_lib::LittleEndian2Int(substr($tempAC3header, 5, 1)) & 0xF8) >> 3; // AC3 and E-AC3 put the "bsid" version identifier in the same place, but unfortnately the 4 bytes between the syncword and the version identifier are interpreted differently, so grab it here so the following code structure can make sense
unset($tempAC3header);
if ($this->AC3header['syncinfo'] !== self::syncword) {
if (!$this->isDependencyFor('matroska')) {
unset($info['fileformat'], $info['ac3']);
return $this->error('Expecting "'.dechex(self::syncword).'" at offset '.$info['avdataoffset'].', found "'.dechex($this->AC3header['syncinfo']).'"');
}
}
$info['audio']['dataformat'] = 'ac3';
$info['audio']['bitrate_mode'] = 'cbr';
$info['audio']['lossless'] = false;
if ($thisfile_ac3_raw_bsi['bsid'] <= 8) {
$thisfile_ac3_raw_bsi['crc1'] = getid3_lib::Bin2Dec($this->readHeaderBSI(16));
$thisfile_ac3_raw_bsi['fscod'] = $this->readHeaderBSI(2); // 5.4.1.3
$thisfile_ac3_raw_bsi['frmsizecod'] = $this->readHeaderBSI(6); // 5.4.1.4
if ($thisfile_ac3_raw_bsi['frmsizecod'] > 37) { // binary: 100101 - see Table 5.18 Frame Size Code Table (1 word = 16 bits)
$this->warning('Unexpected ac3.bsi.frmsizecod value: '.$thisfile_ac3_raw_bsi['frmsizecod'].', bitrate not set correctly');
}
$thisfile_ac3_raw_bsi['bsid'] = $this->readHeaderBSI(5); // we already know this from pre-parsing the version identifier, but re-read it to let the bitstream flow as intended
$thisfile_ac3_raw_bsi['bsmod'] = $this->readHeaderBSI(3);
$thisfile_ac3_raw_bsi['acmod'] = $this->readHeaderBSI(3);
if ($thisfile_ac3_raw_bsi['acmod'] & 0x01) {
// If the lsb of acmod is a 1, center channel is in use and cmixlev follows in the bit stream.
$thisfile_ac3_raw_bsi['cmixlev'] = $this->readHeaderBSI(2);
$thisfile_ac3['center_mix_level'] = self::centerMixLevelLookup($thisfile_ac3_raw_bsi['cmixlev']);
}
if ($thisfile_ac3_raw_bsi['acmod'] & 0x04) {
// If the msb of acmod is a 1, surround channels are in use and surmixlev follows in the bit stream.
$thisfile_ac3_raw_bsi['surmixlev'] = $this->readHeaderBSI(2);
$thisfile_ac3['surround_mix_level'] = self::surroundMixLevelLookup($thisfile_ac3_raw_bsi['surmixlev']);
}
if ($thisfile_ac3_raw_bsi['acmod'] == 0x02) {
// When operating in the two channel mode, this 2-bit code indicates whether or not the program has been encoded in Dolby Surround.
$thisfile_ac3_raw_bsi['dsurmod'] = $this->readHeaderBSI(2);
$thisfile_ac3['dolby_surround_mode'] = self::dolbySurroundModeLookup($thisfile_ac3_raw_bsi['dsurmod']);
}
$thisfile_ac3_raw_bsi['flags']['lfeon'] = (bool) $this->readHeaderBSI(1);
// This indicates how far the average dialogue level is below digital 100 percent. Valid values are 1-31.
// The value of 0 is reserved. The values of 1 to 31 are interpreted as -1 dB to -31 dB with respect to digital 100 percent.
$thisfile_ac3_raw_bsi['dialnorm'] = $this->readHeaderBSI(5); // 5.4.2.8 dialnorm: Dialogue Normalization, 5 Bits
$thisfile_ac3_raw_bsi['flags']['compr'] = (bool) $this->readHeaderBSI(1); // 5.4.2.9 compre: Compression Gain Word Exists, 1 Bit
if ($thisfile_ac3_raw_bsi['flags']['compr']) {
$thisfile_ac3_raw_bsi['compr'] = $this->readHeaderBSI(8); // 5.4.2.10 compr: Compression Gain Word, 8 Bits
$thisfile_ac3['heavy_compression'] = self::heavyCompression($thisfile_ac3_raw_bsi['compr']);
}
$thisfile_ac3_raw_bsi['flags']['langcod'] = (bool) $this->readHeaderBSI(1); // 5.4.2.11 langcode: Language Code Exists, 1 Bit
if ($thisfile_ac3_raw_bsi['flags']['langcod']) {
$thisfile_ac3_raw_bsi['langcod'] = $this->readHeaderBSI(8); // 5.4.2.12 langcod: Language Code, 8 Bits
}
$thisfile_ac3_raw_bsi['flags']['audprodinfo'] = (bool) $this->readHeaderBSI(1); // 5.4.2.13 audprodie: Audio Production Information Exists, 1 Bit
if ($thisfile_ac3_raw_bsi['flags']['audprodinfo']) {
$thisfile_ac3_raw_bsi['mixlevel'] = $this->readHeaderBSI(5); // 5.4.2.14 mixlevel: Mixing Level, 5 Bits
$thisfile_ac3_raw_bsi['roomtyp'] = $this->readHeaderBSI(2); // 5.4.2.15 roomtyp: Room Type, 2 Bits
$thisfile_ac3['mixing_level'] = (80 + $thisfile_ac3_raw_bsi['mixlevel']).'dB';
$thisfile_ac3['room_type'] = self::roomTypeLookup($thisfile_ac3_raw_bsi['roomtyp']);
}
$thisfile_ac3_raw_bsi['dialnorm2'] = $this->readHeaderBSI(5); // 5.4.2.16 dialnorm2: Dialogue Normalization, ch2, 5 Bits
$thisfile_ac3['dialogue_normalization2'] = '-'.$thisfile_ac3_raw_bsi['dialnorm2'].'dB'; // This indicates how far the average dialogue level is below digital 100 percent. Valid values are 1-31. The value of 0 is reserved. The values of 1 to 31 are interpreted as -1 dB to -31 dB with respect to digital 100 percent.
$thisfile_ac3_raw_bsi['flags']['compr2'] = (bool) $this->readHeaderBSI(1); // 5.4.2.17 compr2e: Compression Gain Word Exists, ch2, 1 Bit
if ($thisfile_ac3_raw_bsi['flags']['compr2']) {
$thisfile_ac3_raw_bsi['compr2'] = $this->readHeaderBSI(8); // 5.4.2.18 compr2: Compression Gain Word, ch2, 8 Bits
$thisfile_ac3['heavy_compression2'] = self::heavyCompression($thisfile_ac3_raw_bsi['compr2']);
}
$thisfile_ac3_raw_bsi['flags']['langcod2'] = (bool) $this->readHeaderBSI(1); // 5.4.2.19 langcod2e: Language Code Exists, ch2, 1 Bit
if ($thisfile_ac3_raw_bsi['flags']['langcod2']) {
$thisfile_ac3_raw_bsi['langcod2'] = $this->readHeaderBSI(8); // 5.4.2.20 langcod2: Language Code, ch2, 8 Bits
}
$thisfile_ac3_raw_bsi['flags']['audprodinfo2'] = (bool) $this->readHeaderBSI(1); // 5.4.2.21 audprodi2e: Audio Production Information Exists, ch2, 1 Bit
if ($thisfile_ac3_raw_bsi['flags']['audprodinfo2']) {
$thisfile_ac3_raw_bsi['mixlevel2'] = $this->readHeaderBSI(5); // 5.4.2.22 mixlevel2: Mixing Level, ch2, 5 Bits
$thisfile_ac3_raw_bsi['roomtyp2'] = $this->readHeaderBSI(2); // 5.4.2.23 roomtyp2: Room Type, ch2, 2 Bits
$thisfile_ac3['mixing_level2'] = (80 + $thisfile_ac3_raw_bsi['mixlevel2']).'dB';
$thisfile_ac3['room_type2'] = self::roomTypeLookup($thisfile_ac3_raw_bsi['roomtyp2']);
}
$thisfile_ac3_raw_bsi['copyright'] = (bool) $this->readHeaderBSI(1); // 5.4.2.24 copyrightb: Copyright Bit, 1 Bit
$thisfile_ac3_raw_bsi['original'] = (bool) $this->readHeaderBSI(1); // 5.4.2.25 origbs: Original Bit Stream, 1 Bit
$thisfile_ac3_raw_bsi['flags']['timecod1'] = $this->readHeaderBSI(2); // 5.4.2.26 timecod1e, timcode2e: Time Code (first and second) Halves Exist, 2 Bits
if ($thisfile_ac3_raw_bsi['flags']['timecod1'] & 0x01) {
$thisfile_ac3_raw_bsi['timecod1'] = $this->readHeaderBSI(14); // 5.4.2.27 timecod1: Time code first half, 14 bits
$thisfile_ac3['timecode1'] = 0;
$thisfile_ac3['timecode1'] += (($thisfile_ac3_raw_bsi['timecod1'] & 0x3E00) >> 9) * 3600; // The first 5 bits of this 14-bit field represent the time in hours, with valid values of 0�23
$thisfile_ac3['timecode1'] += (($thisfile_ac3_raw_bsi['timecod1'] & 0x01F8) >> 3) * 60; // The next 6 bits represent the time in minutes, with valid values of 0�59
$thisfile_ac3['timecode1'] += (($thisfile_ac3_raw_bsi['timecod1'] & 0x0003) >> 0) * 8; // The final 3 bits represents the time in 8 second increments, with valid values of 0�7 (representing 0, 8, 16, ... 56 seconds)
}
if ($thisfile_ac3_raw_bsi['flags']['timecod1'] & 0x02) {
$thisfile_ac3_raw_bsi['timecod2'] = $this->readHeaderBSI(14); // 5.4.2.28 timecod2: Time code second half, 14 bits
$thisfile_ac3['timecode2'] = 0;
$thisfile_ac3['timecode2'] += (($thisfile_ac3_raw_bsi['timecod2'] & 0x3800) >> 11) * 1; // The first 3 bits of this 14-bit field represent the time in seconds, with valid values from 0�7 (representing 0-7 seconds)
$thisfile_ac3['timecode2'] += (($thisfile_ac3_raw_bsi['timecod2'] & 0x07C0) >> 6) * (1 / 30); // The next 5 bits represents the time in frames, with valid values from 0�29 (one frame = 1/30th of a second)
$thisfile_ac3['timecode2'] += (($thisfile_ac3_raw_bsi['timecod2'] & 0x003F) >> 0) * ((1 / 30) / 60); // The final 6 bits represents fractions of 1/64 of a frame, with valid values from 0�63
}
$thisfile_ac3_raw_bsi['flags']['addbsi'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['addbsi']) {
$thisfile_ac3_raw_bsi['addbsi_length'] = $this->readHeaderBSI(6) + 1; // This 6-bit code, which exists only if addbside is a 1, indicates the length in bytes of additional bit stream information. The valid range of addbsil is 0�63, indicating 1�64 additional bytes, respectively.
$this->AC3header['bsi'] .= getid3_lib::BigEndian2Bin($this->fread($thisfile_ac3_raw_bsi['addbsi_length']));
$thisfile_ac3_raw_bsi['addbsi_data'] = substr($this->AC3header['bsi'], $this->BSIoffset, $thisfile_ac3_raw_bsi['addbsi_length'] * 8);
$this->BSIoffset += $thisfile_ac3_raw_bsi['addbsi_length'] * 8;
}
} elseif ($thisfile_ac3_raw_bsi['bsid'] <= 16) { // E-AC3
$this->error('E-AC3 parsing is incomplete and experimental in this version of getID3 ('.$this->getid3->version().'). Notably the bitrate calculations are wrong -- value might (or not) be correct, but it is not calculated correctly. Email info@getid3.org if you know how to calculate EAC3 bitrate correctly.');
$info['audio']['dataformat'] = 'eac3';
$thisfile_ac3_raw_bsi['strmtyp'] = $this->readHeaderBSI(2);
$thisfile_ac3_raw_bsi['substreamid'] = $this->readHeaderBSI(3);
$thisfile_ac3_raw_bsi['frmsiz'] = $this->readHeaderBSI(11);
$thisfile_ac3_raw_bsi['fscod'] = $this->readHeaderBSI(2);
if ($thisfile_ac3_raw_bsi['fscod'] == 3) {
$thisfile_ac3_raw_bsi['fscod2'] = $this->readHeaderBSI(2);
$thisfile_ac3_raw_bsi['numblkscod'] = 3; // six blocks per syncframe
} else {
$thisfile_ac3_raw_bsi['numblkscod'] = $this->readHeaderBSI(2);
}
$thisfile_ac3['bsi']['blocks_per_sync_frame'] = self::blocksPerSyncFrame($thisfile_ac3_raw_bsi['numblkscod']);
$thisfile_ac3_raw_bsi['acmod'] = $this->readHeaderBSI(3);
$thisfile_ac3_raw_bsi['flags']['lfeon'] = (bool) $this->readHeaderBSI(1);
$thisfile_ac3_raw_bsi['bsid'] = $this->readHeaderBSI(5); // we already know this from pre-parsing the version identifier, but re-read it to let the bitstream flow as intended
$thisfile_ac3_raw_bsi['dialnorm'] = $this->readHeaderBSI(5);
$thisfile_ac3_raw_bsi['flags']['compr'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['compr']) {
$thisfile_ac3_raw_bsi['compr'] = $this->readHeaderBSI(8);
}
if ($thisfile_ac3_raw_bsi['acmod'] == 0) { // if 1+1 mode (dual mono, so some items need a second value)
$thisfile_ac3_raw_bsi['dialnorm2'] = $this->readHeaderBSI(5);
$thisfile_ac3_raw_bsi['flags']['compr2'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['compr2']) {
$thisfile_ac3_raw_bsi['compr2'] = $this->readHeaderBSI(8);
}
}
if ($thisfile_ac3_raw_bsi['strmtyp'] == 1) { // if dependent stream
$thisfile_ac3_raw_bsi['flags']['chanmap'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['chanmap']) {
$thisfile_ac3_raw_bsi['chanmap'] = $this->readHeaderBSI(8);
}
}
$thisfile_ac3_raw_bsi['flags']['mixmdat'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['mixmdat']) { // Mixing metadata
if ($thisfile_ac3_raw_bsi['acmod'] > 2) { // if more than 2 channels
$thisfile_ac3_raw_bsi['dmixmod'] = $this->readHeaderBSI(2);
}
if (($thisfile_ac3_raw_bsi['acmod'] & 0x01) && ($thisfile_ac3_raw_bsi['acmod'] > 2)) { // if three front channels exist
$thisfile_ac3_raw_bsi['ltrtcmixlev'] = $this->readHeaderBSI(3);
$thisfile_ac3_raw_bsi['lorocmixlev'] = $this->readHeaderBSI(3);
}
if ($thisfile_ac3_raw_bsi['acmod'] & 0x04) { // if a surround channel exists
$thisfile_ac3_raw_bsi['ltrtsurmixlev'] = $this->readHeaderBSI(3);
$thisfile_ac3_raw_bsi['lorosurmixlev'] = $this->readHeaderBSI(3);
}
if ($thisfile_ac3_raw_bsi['flags']['lfeon']) { // if the LFE channel exists
$thisfile_ac3_raw_bsi['flags']['lfemixlevcod'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['lfemixlevcod']) {
$thisfile_ac3_raw_bsi['lfemixlevcod'] = $this->readHeaderBSI(5);
}
}
if ($thisfile_ac3_raw_bsi['strmtyp'] == 0) { // if independent stream
$thisfile_ac3_raw_bsi['flags']['pgmscl'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['pgmscl']) {
$thisfile_ac3_raw_bsi['pgmscl'] = $this->readHeaderBSI(6);
}
if ($thisfile_ac3_raw_bsi['acmod'] == 0) { // if 1+1 mode (dual mono, so some items need a second value)
$thisfile_ac3_raw_bsi['flags']['pgmscl2'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['pgmscl2']) {
$thisfile_ac3_raw_bsi['pgmscl2'] = $this->readHeaderBSI(6);
}
}
$thisfile_ac3_raw_bsi['flags']['extpgmscl'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['extpgmscl']) {
$thisfile_ac3_raw_bsi['extpgmscl'] = $this->readHeaderBSI(6);
}
$thisfile_ac3_raw_bsi['mixdef'] = $this->readHeaderBSI(2);
if ($thisfile_ac3_raw_bsi['mixdef'] == 1) { // mixing option 2
$thisfile_ac3_raw_bsi['premixcmpsel'] = (bool) $this->readHeaderBSI(1);
$thisfile_ac3_raw_bsi['drcsrc'] = (bool) $this->readHeaderBSI(1);
$thisfile_ac3_raw_bsi['premixcmpscl'] = $this->readHeaderBSI(3);
} elseif ($thisfile_ac3_raw_bsi['mixdef'] == 2) { // mixing option 3
$thisfile_ac3_raw_bsi['mixdata'] = $this->readHeaderBSI(12);
} elseif ($thisfile_ac3_raw_bsi['mixdef'] == 3) { // mixing option 4
$mixdefbitsread = 0;
$thisfile_ac3_raw_bsi['mixdeflen'] = $this->readHeaderBSI(5); $mixdefbitsread += 5;
$thisfile_ac3_raw_bsi['flags']['mixdata2'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
if ($thisfile_ac3_raw_bsi['flags']['mixdata2']) {
$thisfile_ac3_raw_bsi['premixcmpsel'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
$thisfile_ac3_raw_bsi['drcsrc'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
$thisfile_ac3_raw_bsi['premixcmpscl'] = $this->readHeaderBSI(3); $mixdefbitsread += 3;
$thisfile_ac3_raw_bsi['flags']['extpgmlscl'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
if ($thisfile_ac3_raw_bsi['flags']['extpgmlscl']) {
$thisfile_ac3_raw_bsi['extpgmlscl'] = $this->readHeaderBSI(4); $mixdefbitsread += 4;
}
$thisfile_ac3_raw_bsi['flags']['extpgmcscl'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
if ($thisfile_ac3_raw_bsi['flags']['extpgmcscl']) {
$thisfile_ac3_raw_bsi['extpgmcscl'] = $this->readHeaderBSI(4); $mixdefbitsread += 4;
}
$thisfile_ac3_raw_bsi['flags']['extpgmrscl'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
if ($thisfile_ac3_raw_bsi['flags']['extpgmrscl']) {
$thisfile_ac3_raw_bsi['extpgmrscl'] = $this->readHeaderBSI(4);
}
$thisfile_ac3_raw_bsi['flags']['extpgmlsscl'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
if ($thisfile_ac3_raw_bsi['flags']['extpgmlsscl']) {
$thisfile_ac3_raw_bsi['extpgmlsscl'] = $this->readHeaderBSI(4); $mixdefbitsread += 4;
}
$thisfile_ac3_raw_bsi['flags']['extpgmrsscl'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
if ($thisfile_ac3_raw_bsi['flags']['extpgmrsscl']) {
$thisfile_ac3_raw_bsi['extpgmrsscl'] = $this->readHeaderBSI(4); $mixdefbitsread += 4;
}
$thisfile_ac3_raw_bsi['flags']['extpgmlfescl'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
if ($thisfile_ac3_raw_bsi['flags']['extpgmlfescl']) {
$thisfile_ac3_raw_bsi['extpgmlfescl'] = $this->readHeaderBSI(4); $mixdefbitsread += 4;
}
$thisfile_ac3_raw_bsi['flags']['dmixscl'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
if ($thisfile_ac3_raw_bsi['flags']['dmixscl']) {
$thisfile_ac3_raw_bsi['dmixscl'] = $this->readHeaderBSI(4); $mixdefbitsread += 4;
}
$thisfile_ac3_raw_bsi['flags']['addch'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
if ($thisfile_ac3_raw_bsi['flags']['addch']) {
$thisfile_ac3_raw_bsi['flags']['extpgmaux1scl'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
if ($thisfile_ac3_raw_bsi['flags']['extpgmaux1scl']) {
$thisfile_ac3_raw_bsi['extpgmaux1scl'] = $this->readHeaderBSI(4); $mixdefbitsread += 4;
}
$thisfile_ac3_raw_bsi['flags']['extpgmaux2scl'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
if ($thisfile_ac3_raw_bsi['flags']['extpgmaux2scl']) {
$thisfile_ac3_raw_bsi['extpgmaux2scl'] = $this->readHeaderBSI(4); $mixdefbitsread += 4;
}
}
}
$thisfile_ac3_raw_bsi['flags']['mixdata3'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
if ($thisfile_ac3_raw_bsi['flags']['mixdata3']) {
$thisfile_ac3_raw_bsi['spchdat'] = $this->readHeaderBSI(5); $mixdefbitsread += 5;
$thisfile_ac3_raw_bsi['flags']['addspchdat'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
if ($thisfile_ac3_raw_bsi['flags']['addspchdat']) {
$thisfile_ac3_raw_bsi['spchdat1'] = $this->readHeaderBSI(5); $mixdefbitsread += 5;
$thisfile_ac3_raw_bsi['spchan1att'] = $this->readHeaderBSI(2); $mixdefbitsread += 2;
$thisfile_ac3_raw_bsi['flags']['addspchdat1'] = (bool) $this->readHeaderBSI(1); $mixdefbitsread += 1;
if ($thisfile_ac3_raw_bsi['flags']['addspchdat1']) {
$thisfile_ac3_raw_bsi['spchdat2'] = $this->readHeaderBSI(5); $mixdefbitsread += 5;
$thisfile_ac3_raw_bsi['spchan2att'] = $this->readHeaderBSI(3); $mixdefbitsread += 3;
}
}
}
$mixdata_bits = (8 * ($thisfile_ac3_raw_bsi['mixdeflen'] + 2)) - $mixdefbitsread;
$mixdata_fill = (($mixdata_bits % 8) ? 8 - ($mixdata_bits % 8) : 0);
$thisfile_ac3_raw_bsi['mixdata'] = $this->readHeaderBSI($mixdata_bits);
$thisfile_ac3_raw_bsi['mixdatafill'] = $this->readHeaderBSI($mixdata_fill);
unset($mixdefbitsread, $mixdata_bits, $mixdata_fill);
}
if ($thisfile_ac3_raw_bsi['acmod'] < 2) { // if mono or dual mono source
$thisfile_ac3_raw_bsi['flags']['paninfo'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['paninfo']) {
$thisfile_ac3_raw_bsi['panmean'] = $this->readHeaderBSI(8);
$thisfile_ac3_raw_bsi['paninfo'] = $this->readHeaderBSI(6);
}
if ($thisfile_ac3_raw_bsi['acmod'] == 0) { // if 1+1 mode (dual mono, so some items need a second value)
$thisfile_ac3_raw_bsi['flags']['paninfo2'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['paninfo2']) {
$thisfile_ac3_raw_bsi['panmean2'] = $this->readHeaderBSI(8);
$thisfile_ac3_raw_bsi['paninfo2'] = $this->readHeaderBSI(6);
}
}
}
$thisfile_ac3_raw_bsi['flags']['frmmixcfginfo'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['frmmixcfginfo']) { // mixing configuration information
if ($thisfile_ac3_raw_bsi['numblkscod'] == 0) {
$thisfile_ac3_raw_bsi['blkmixcfginfo'][0] = $this->readHeaderBSI(5);
} else {
for ($blk = 0; $blk < $thisfile_ac3_raw_bsi['numblkscod']; $blk++) {
$thisfile_ac3_raw_bsi['flags']['blkmixcfginfo'.$blk] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['blkmixcfginfo'.$blk]) { // mixing configuration information
$thisfile_ac3_raw_bsi['blkmixcfginfo'][$blk] = $this->readHeaderBSI(5);
}
}
}
}
}
}
$thisfile_ac3_raw_bsi['flags']['infomdat'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['infomdat']) { // Informational metadata
$thisfile_ac3_raw_bsi['bsmod'] = $this->readHeaderBSI(3);
$thisfile_ac3_raw_bsi['flags']['copyrightb'] = (bool) $this->readHeaderBSI(1);
$thisfile_ac3_raw_bsi['flags']['origbs'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['acmod'] == 2) { // if in 2/0 mode
$thisfile_ac3_raw_bsi['dsurmod'] = $this->readHeaderBSI(2);
$thisfile_ac3_raw_bsi['dheadphonmod'] = $this->readHeaderBSI(2);
}
if ($thisfile_ac3_raw_bsi['acmod'] >= 6) { // if both surround channels exist
$thisfile_ac3_raw_bsi['dsurexmod'] = $this->readHeaderBSI(2);
}
$thisfile_ac3_raw_bsi['flags']['audprodi'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['audprodi']) {
$thisfile_ac3_raw_bsi['mixlevel'] = $this->readHeaderBSI(5);
$thisfile_ac3_raw_bsi['roomtyp'] = $this->readHeaderBSI(2);
$thisfile_ac3_raw_bsi['flags']['adconvtyp'] = (bool) $this->readHeaderBSI(1);
}
if ($thisfile_ac3_raw_bsi['acmod'] == 0) { // if 1+1 mode (dual mono, so some items need a second value)
$thisfile_ac3_raw_bsi['flags']['audprodi2'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['audprodi2']) {
$thisfile_ac3_raw_bsi['mixlevel2'] = $this->readHeaderBSI(5);
$thisfile_ac3_raw_bsi['roomtyp2'] = $this->readHeaderBSI(2);
$thisfile_ac3_raw_bsi['flags']['adconvtyp2'] = (bool) $this->readHeaderBSI(1);
}
}
if ($thisfile_ac3_raw_bsi['fscod'] < 3) { // if not half sample rate
$thisfile_ac3_raw_bsi['flags']['sourcefscod'] = (bool) $this->readHeaderBSI(1);
}
}
if (($thisfile_ac3_raw_bsi['strmtyp'] == 0) && ($thisfile_ac3_raw_bsi['numblkscod'] != 3)) { // if both surround channels exist
$thisfile_ac3_raw_bsi['flags']['convsync'] = (bool) $this->readHeaderBSI(1);
}
if ($thisfile_ac3_raw_bsi['strmtyp'] == 2) { // if bit stream converted from AC-3
if ($thisfile_ac3_raw_bsi['numblkscod'] != 3) { // 6 blocks per syncframe
$thisfile_ac3_raw_bsi['flags']['blkid'] = 1;
} else {
$thisfile_ac3_raw_bsi['flags']['blkid'] = (bool) $this->readHeaderBSI(1);
}
if ($thisfile_ac3_raw_bsi['flags']['blkid']) {
$thisfile_ac3_raw_bsi['frmsizecod'] = $this->readHeaderBSI(6);
}
}
$thisfile_ac3_raw_bsi['flags']['addbsi'] = (bool) $this->readHeaderBSI(1);
if ($thisfile_ac3_raw_bsi['flags']['addbsi']) {
$thisfile_ac3_raw_bsi['addbsil'] = $this->readHeaderBSI(6);
$thisfile_ac3_raw_bsi['addbsi'] = $this->readHeaderBSI(($thisfile_ac3_raw_bsi['addbsil'] + 1) * 8);
}
} else {
$this->error('Bit stream identification is version '.$thisfile_ac3_raw_bsi['bsid'].', but getID3() only understands up to version 16. Please submit a support ticket with a sample file.');
unset($info['ac3']);
return false;
}
if (isset($thisfile_ac3_raw_bsi['fscod2'])) {
$thisfile_ac3['sample_rate'] = self::sampleRateCodeLookup2($thisfile_ac3_raw_bsi['fscod2']);
} else {
$thisfile_ac3['sample_rate'] = self::sampleRateCodeLookup($thisfile_ac3_raw_bsi['fscod']);
}
if ($thisfile_ac3_raw_bsi['fscod'] <= 3) {
$info['audio']['sample_rate'] = $thisfile_ac3['sample_rate'];
} else {
$this->warning('Unexpected ac3.bsi.fscod value: '.$thisfile_ac3_raw_bsi['fscod']);
}
if (isset($thisfile_ac3_raw_bsi['frmsizecod'])) {
$thisfile_ac3['frame_length'] = self::frameSizeLookup($thisfile_ac3_raw_bsi['frmsizecod'], $thisfile_ac3_raw_bsi['fscod']);
$thisfile_ac3['bitrate'] = self::bitrateLookup($thisfile_ac3_raw_bsi['frmsizecod']);
} elseif (!empty($thisfile_ac3_raw_bsi['frmsiz'])) {
// this isn't right, but it's (usually) close, roughly 5% less than it should be.
// but WHERE is the actual bitrate value stored in EAC3?? email info@getid3.org if you know!
$thisfile_ac3['bitrate'] = ($thisfile_ac3_raw_bsi['frmsiz'] + 1) * 16 * 30; // The frmsiz field shall contain a value one less than the overall size of the coded syncframe in 16-bit words. That is, this field may assume a value ranging from 0 to 2047, and these values correspond to syncframe sizes ranging from 1 to 2048.
// kludge-fix to make it approximately the expected value, still not "right":
$thisfile_ac3['bitrate'] = round(($thisfile_ac3['bitrate'] * 1.05) / 16000) * 16000;
}
$info['audio']['bitrate'] = $thisfile_ac3['bitrate'];
if (isset($thisfile_ac3_raw_bsi['bsmod']) && isset($thisfile_ac3_raw_bsi['acmod'])) {
$thisfile_ac3['service_type'] = self::serviceTypeLookup($thisfile_ac3_raw_bsi['bsmod'], $thisfile_ac3_raw_bsi['acmod']);
}
$ac3_coding_mode = self::audioCodingModeLookup($thisfile_ac3_raw_bsi['acmod']);
foreach($ac3_coding_mode as $key => $value) {
$thisfile_ac3[$key] = $value;
}
switch ($thisfile_ac3_raw_bsi['acmod']) {
case 0:
case 1:
$info['audio']['channelmode'] = 'mono';
break;
case 3:
case 4:
$info['audio']['channelmode'] = 'stereo';
break;
default:
$info['audio']['channelmode'] = 'surround';
break;
}
$info['audio']['channels'] = $thisfile_ac3['num_channels'];
$thisfile_ac3['lfe_enabled'] = $thisfile_ac3_raw_bsi['flags']['lfeon'];
if ($thisfile_ac3_raw_bsi['flags']['lfeon']) {
$info['audio']['channels'] .= '.1';
}
$thisfile_ac3['channels_enabled'] = self::channelsEnabledLookup($thisfile_ac3_raw_bsi['acmod'], $thisfile_ac3_raw_bsi['flags']['lfeon']);
$thisfile_ac3['dialogue_normalization'] = '-'.$thisfile_ac3_raw_bsi['dialnorm'].'dB';
return true;
}
/**
* @param int $length
*
* @return int
*/
private function readHeaderBSI($length) {
$data = substr($this->AC3header['bsi'], $this->BSIoffset, $length);
$this->BSIoffset += $length;
return bindec($data);
}
/**
* @param int $fscod
*
* @return int|string|false
*/
public static function sampleRateCodeLookup($fscod) {
static $sampleRateCodeLookup = array(
0 => 48000,
1 => 44100,
2 => 32000,
3 => 'reserved' // If the reserved code is indicated, the decoder should not attempt to decode audio and should mute.
);
return (isset($sampleRateCodeLookup[$fscod]) ? $sampleRateCodeLookup[$fscod] : false);
}
/**
* @param int $fscod2
*
* @return int|string|false
*/
public static function sampleRateCodeLookup2($fscod2) {
static $sampleRateCodeLookup2 = array(
0 => 24000,
1 => 22050,
2 => 16000,
3 => 'reserved' // If the reserved code is indicated, the decoder should not attempt to decode audio and should mute.
);
return (isset($sampleRateCodeLookup2[$fscod2]) ? $sampleRateCodeLookup2[$fscod2] : false);
}
/**
* @param int $bsmod
* @param int $acmod
*
* @return string|false
*/
public static function serviceTypeLookup($bsmod, $acmod) {
static $serviceTypeLookup = array();
if (empty($serviceTypeLookup)) {
for ($i = 0; $i <= 7; $i++) {
$serviceTypeLookup[0][$i] = 'main audio service: complete main (CM)';
$serviceTypeLookup[1][$i] = 'main audio service: music and effects (ME)';
$serviceTypeLookup[2][$i] = 'associated service: visually impaired (VI)';
$serviceTypeLookup[3][$i] = 'associated service: hearing impaired (HI)';
$serviceTypeLookup[4][$i] = 'associated service: dialogue (D)';
$serviceTypeLookup[5][$i] = 'associated service: commentary (C)';
$serviceTypeLookup[6][$i] = 'associated service: emergency (E)';
}
$serviceTypeLookup[7][1] = 'associated service: voice over (VO)';
for ($i = 2; $i <= 7; $i++) {
$serviceTypeLookup[7][$i] = 'main audio service: karaoke';
}
}
return (isset($serviceTypeLookup[$bsmod][$acmod]) ? $serviceTypeLookup[$bsmod][$acmod] : false);
}
/**
* @param int $acmod
*
* @return array|false
*/
public static function audioCodingModeLookup($acmod) {
// array(channel configuration, # channels (not incl LFE), channel order)
static $audioCodingModeLookup = array (
0 => array('channel_config'=>'1+1', 'num_channels'=>2, 'channel_order'=>'Ch1,Ch2'),
1 => array('channel_config'=>'1/0', 'num_channels'=>1, 'channel_order'=>'C'),
2 => array('channel_config'=>'2/0', 'num_channels'=>2, 'channel_order'=>'L,R'),
3 => array('channel_config'=>'3/0', 'num_channels'=>3, 'channel_order'=>'L,C,R'),
4 => array('channel_config'=>'2/1', 'num_channels'=>3, 'channel_order'=>'L,R,S'),
5 => array('channel_config'=>'3/1', 'num_channels'=>4, 'channel_order'=>'L,C,R,S'),
6 => array('channel_config'=>'2/2', 'num_channels'=>4, 'channel_order'=>'L,R,SL,SR'),
7 => array('channel_config'=>'3/2', 'num_channels'=>5, 'channel_order'=>'L,C,R,SL,SR'),
);
return (isset($audioCodingModeLookup[$acmod]) ? $audioCodingModeLookup[$acmod] : false);
}
/**
* @param int $cmixlev
*
* @return int|float|string|false
*/
public static function centerMixLevelLookup($cmixlev) {
static $centerMixLevelLookup;
if (empty($centerMixLevelLookup)) {
$centerMixLevelLookup = array(
0 => pow(2, -3.0 / 6), // 0.707 (-3.0 dB)
1 => pow(2, -4.5 / 6), // 0.595 (-4.5 dB)
2 => pow(2, -6.0 / 6), // 0.500 (-6.0 dB)
3 => 'reserved'
);
}
return (isset($centerMixLevelLookup[$cmixlev]) ? $centerMixLevelLookup[$cmixlev] : false);
}
/**
* @param int $surmixlev
*
* @return int|float|string|false
*/
public static function surroundMixLevelLookup($surmixlev) {
static $surroundMixLevelLookup;
if (empty($surroundMixLevelLookup)) {
$surroundMixLevelLookup = array(
0 => pow(2, -3.0 / 6),
1 => pow(2, -6.0 / 6),
2 => 0,
3 => 'reserved'
);
}
return (isset($surroundMixLevelLookup[$surmixlev]) ? $surroundMixLevelLookup[$surmixlev] : false);
}
/**
* @param int $dsurmod
*
* @return string|false
*/
public static function dolbySurroundModeLookup($dsurmod) {
static $dolbySurroundModeLookup = array(
0 => 'not indicated',
1 => 'Not Dolby Surround encoded',
2 => 'Dolby Surround encoded',
3 => 'reserved'
);
return (isset($dolbySurroundModeLookup[$dsurmod]) ? $dolbySurroundModeLookup[$dsurmod] : false);
}
/**
* @param int $acmod
* @param bool $lfeon
*
* @return array
*/
public static function channelsEnabledLookup($acmod, $lfeon) {
$lookup = array(
'ch1'=>($acmod == 0),
'ch2'=>($acmod == 0),
'left'=>($acmod > 1),
'right'=>($acmod > 1),
'center'=>(bool) ($acmod & 0x01),
'surround_mono'=>false,
'surround_left'=>false,
'surround_right'=>false,
'lfe'=>$lfeon);
switch ($acmod) {
case 4:
case 5:
$lookup['surround_mono'] = true;
break;
case 6:
case 7:
$lookup['surround_left'] = true;
$lookup['surround_right'] = true;
break;
}
return $lookup;
}
/**
* @param int $compre
*
* @return float|int
*/
public static function heavyCompression($compre) {
// The first four bits indicate gain changes in 6.02dB increments which can be
// implemented with an arithmetic shift operation. The following four bits
// indicate linear gain changes, and require a 5-bit multiply.
// We will represent the two 4-bit fields of compr as follows:
// X0 X1 X2 X3 . Y4 Y5 Y6 Y7
// The meaning of the X values is most simply described by considering X to represent a 4-bit
// signed integer with values from -8 to +7. The gain indicated by X is then (X + 1) * 6.02 dB. The
// following table shows this in detail.
// Meaning of 4 msb of compr
// 7 +48.16 dB
// 6 +42.14 dB
// 5 +36.12 dB
// 4 +30.10 dB
// 3 +24.08 dB
// 2 +18.06 dB
// 1 +12.04 dB
// 0 +6.02 dB
// -1 0 dB
// -2 -6.02 dB
// -3 -12.04 dB
// -4 -18.06 dB
// -5 -24.08 dB
// -6 -30.10 dB
// -7 -36.12 dB
// -8 -42.14 dB
$fourbit = str_pad(decbin(($compre & 0xF0) >> 4), 4, '0', STR_PAD_LEFT);
if ($fourbit[0] == '1') {
$log_gain = -8 + bindec(substr($fourbit, 1));
} else {
$log_gain = bindec(substr($fourbit, 1));
}
$log_gain = ($log_gain + 1) * getid3_lib::RGADamplitude2dB(2);
// The value of Y is a linear representation of a gain change of up to -6 dB. Y is considered to
// be an unsigned fractional integer, with a leading value of 1, or: 0.1 Y4 Y5 Y6 Y7 (base 2). Y can
// represent values between 0.111112 (or 31/32) and 0.100002 (or 1/2). Thus, Y can represent gain
// changes from -0.28 dB to -6.02 dB.
$lin_gain = (16 + ($compre & 0x0F)) / 32;
// The combination of X and Y values allows compr to indicate gain changes from
// 48.16 - 0.28 = +47.89 dB, to
// -42.14 - 6.02 = -48.16 dB.
return $log_gain - $lin_gain;
}
/**
* @param int $roomtyp
*
* @return string|false
*/
public static function roomTypeLookup($roomtyp) {
static $roomTypeLookup = array(
0 => 'not indicated',
1 => 'large room, X curve monitor',
2 => 'small room, flat monitor',
3 => 'reserved'
);
return (isset($roomTypeLookup[$roomtyp]) ? $roomTypeLookup[$roomtyp] : false);
}
/**
* @param int $frmsizecod
* @param int $fscod
*
* @return int|false
*/
public static function frameSizeLookup($frmsizecod, $fscod) {
// LSB is whether padding is used or not
$padding = (bool) ($frmsizecod & 0x01);
$framesizeid = ($frmsizecod & 0x3E) >> 1;
static $frameSizeLookup = array();
if (empty($frameSizeLookup)) {
$frameSizeLookup = array (
0 => array( 128, 138, 192), // 32 kbps
1 => array( 160, 174, 240), // 40 kbps
2 => array( 192, 208, 288), // 48 kbps
3 => array( 224, 242, 336), // 56 kbps
4 => array( 256, 278, 384), // 64 kbps
5 => array( 320, 348, 480), // 80 kbps
6 => array( 384, 416, 576), // 96 kbps
7 => array( 448, 486, 672), // 112 kbps
8 => array( 512, 556, 768), // 128 kbps
9 => array( 640, 696, 960), // 160 kbps
10 => array( 768, 834, 1152), // 192 kbps
11 => array( 896, 974, 1344), // 224 kbps
12 => array(1024, 1114, 1536), // 256 kbps
13 => array(1280, 1392, 1920), // 320 kbps
14 => array(1536, 1670, 2304), // 384 kbps
15 => array(1792, 1950, 2688), // 448 kbps
16 => array(2048, 2228, 3072), // 512 kbps
17 => array(2304, 2506, 3456), // 576 kbps
18 => array(2560, 2786, 3840) // 640 kbps
);
}
$paddingBytes = 0;
if (($fscod == 1) && $padding) {
// frame lengths are padded by 1 word (16 bits) at 44100
// (fscode==1) means 44100Hz (see sampleRateCodeLookup)
$paddingBytes = 2;
}
return (isset($frameSizeLookup[$framesizeid][$fscod]) ? $frameSizeLookup[$framesizeid][$fscod] + $paddingBytes : false);
}
/**
* @param int $frmsizecod
*
* @return int|false
*/
public static function bitrateLookup($frmsizecod) {
// LSB is whether padding is used or not
$padding = (bool) ($frmsizecod & 0x01);
$framesizeid = ($frmsizecod & 0x3E) >> 1;
static $bitrateLookup = array(
0 => 32000,
1 => 40000,
2 => 48000,
3 => 56000,
4 => 64000,
5 => 80000,
6 => 96000,
7 => 112000,
8 => 128000,
9 => 160000,
10 => 192000,
11 => 224000,
12 => 256000,
13 => 320000,
14 => 384000,
15 => 448000,
16 => 512000,
17 => 576000,
18 => 640000,
);
return (isset($bitrateLookup[$framesizeid]) ? $bitrateLookup[$framesizeid] : false);
}
/**
* @param int $numblkscod
*
* @return int|false
*/
public static function blocksPerSyncFrame($numblkscod) {
static $blocksPerSyncFrameLookup = array(
0 => 1,
1 => 2,
2 => 3,
3 => 6,
);
return (isset($blocksPerSyncFrameLookup[$numblkscod]) ? $blocksPerSyncFrameLookup[$numblkscod] : false);
}
}
Повторное тестирование – tahkoom.com
ХІМІЧНІ РЕАКТИВИ Фармацевтична енциклопедія
Ретест проводится после внесения изменений или исправлений в систему, программное обеспечение или веб-приложение, чтобы убедиться, что проблема была успешно устранена и функционал работает корректно. Ретест помогает убедиться в качестве исправлений и предотвратить повторное возникновение ошибок. Цена пытается пробиться вниз, но срабатывание размещенных на уровне поддержки заявок крупных игроков на покупку приводит к развороту цены вверх. Затем цена снова пытается добраться до уровня поддержки (синяя стрелка), но здесь срабатывают заявки маркет-мейкеров на покупку. Блок ордеров часто является сигналом к развороту тренда, так как маркет-мейкер в конечном счете разворачивает цену в нужную ему сторону. Поэтому сделки открываются в сторону тренда по отложенным ордерам в момент выхода цены из зоны консолидации.
Что такое блоки ордеров на Форекс и как их использовать
Достаточно перейти на младший таймфрейм, то увидите там ордер блоки, но уже без хвостов, сами эти ордер блоки на старшем таймфрейме выглядит как фитиль. На графике это свеча или несколько свечей паттерна «Поглощение», пробивающих диапазон блоков ордеров, за которыми следует возврат в диапазон, отталкивание и начало нового тренда. Пользовательские индикаторы блоков ордеров представляют собой инструменты технического анализа, отмечающие на графике подходящие свечи.
Как найти Ордер Блоки?
В аналитической химии приходится иметь дело главным образом с селективными и групповыми реагентами. Селективный реагент взаимодействует с небольшим числом ионов. Групповой реагент применяется для одновременного выделения многих ионов. Селективные аналитические реагенты представляют собой преимущественно сложные https://forexby.com/ органические соединения, способные к образованию характерных внутрикомплексных соединений с ионами металлов.
Цена возвращается в него, касается уровня поддержки диапазона, но под давлением блок-ордеров крупного ретест це покупателя уходит вверх. На свече, которая пробивает диапазон, можно открывать сделку. Блоки ордеров — это зоны спроса и предложения, в которых институциональные участники рынка размещают крупные заявки. Так как заявка большого объема может вызвать резкое изменение цены, ее разбивают на меньшие ордер-блоки, которые исполняются по мере накопления ликвидности встречных заявок.
Появляются на медвежьем тренде, после которого цена разворачивается вверх.
Спрос «гасится» и на свече с медвежьими ордер блоками появляется большая тень, цена возвращается к уровню открытия.
Если индикатор растет, на рынке фаза накопления (покупок), падает — начало распродаж.
Продавцы продолжают выставлять заявки, цена снова откатывается вниз.
Так как дробленые заявки маркет-мейкера выставляются последовательно, формирование блок-ордера видно только на старших временных интервалах, где все объемы заявок консолидированы в тело одной свечи.
Нюансы в отрисовке блоков
Так, при разработке компилятора при прогоне регрессионных тестов рассматривается размер получаемого кода, скорость его выполнения и время компиляции каждого из тестовых примеров. Такие ошибки — когда после внесения изменений в программу, перестаёт работать то, что должно было продолжать работать, — называют регрессионными ошибками (англ. regression bugs). Как Вы убедились не так уж сложно найти ордер блоки на графике и применять в торговле. Сами по себе блоки не несут никакой полезной информации, важно учитывать много дополнительных факторов и обязательно следить за трендом, всегда отдавайте приоритет старшему таймфрейму. Задача трейдера дождаться когда сформируется ордер блок, только после этого входить в сделку в случае повторного возврата цены в зону OB.
Спрос «гасится» и на свече с медвежьими ордер блоками появляется большая тень, цена возвращается к уровню открытия. Следующая часть блок-ордеров приводит к ценовому движению вниз. Но у покупателей достаточно ликвидности, поэтому красная свеча «рисует» тень вниз. От последней восходящей свечи рисуем вправо прямоугольник, определяющий целевую зону цены.
Эксперименты с участием одного испытуемого играют важную роль в психофизиологии, психофизике, психологии научения, когнитивной психологии. Результаты этих экспериментов очень зависят от предубеждении экспериментатора и отношений, которые складываются между ним и испытуемым. Исследование по схеме “один испытуемый” называется также планированием временных серий.
Если после изменения длины одного поля изменились правила валидации всех полей на сайте — поздравляю, у вас большие проблемы с профессионализмом разработчиков. Иногда, непреднамеренно, разработчик делая исправление в коде может повлиять на части приложения, о которых он никогда не слышал и не представлял, что они существуют и связаны каким-то образом. Отправлять ли компонент/продукт на повторное тестирование, решают разработчики, принимая или отклоняя баг. Если баг найден пользователем, но отклонен разработчиком, тестировщик должен еще раз его проверить и найти причину проблемы.
Обратите внимание, мы видим снижение цены, которое совершает крупный игрок. Заведомо делает актив по более выгодной цене для удачно входа в позиции. Немного ранее в скринах я помечал на примерах “ликвидность” так вот ПЕРВОЕ условие OB стоит искать там где произошел захват ликвидности. Если внимательно читали статью, то запомнили что OB надо искать по направлению тренда, учитывать ликвидность, имбаланс. Профессионалы могут использовать любые инструменты технического и фундаментального анализа, включая сложные математические и статистические модели.
زر الذهاب إلى الأعلى
.jpeg)
.jpeg)